300g/m2 CSM E-glass Emulsion Fiber Chopped Strand Mat

 

300g/m2 CSM E-glass Emulsion Fiber Chopped Strand Mat

 

 

 

1.Description Of Chopped Strand Mat:

 

Fiberglass Chopped Strand Mat is kinds of reinforcing products that made from continuous fiberglass strand, which is chopped into a certain length, distributed in a random and non-directional position and bonded with binders. It is suitable for hand lay-up. Mold press, filament winding and mechanical forming etc., such GRP processes. The main products include kinds of panels, boats, bath equipments, automobile parts and cooling towers etc. 

 

 

Explaination Of  Some Noun:

  

EMC:Product type

 

1.EMC:E-glass Chopped Strand Mat(Powder)

2.EMC:E-glass Chopped Strand Mat(Emulsion)

3.CMC:C-glass Chopped Strand Mat

 

 

2.Simple Size Of Chopped Strand Mat:

 

Style	Mass(g/m2)	Tensile Strength(N/50m)		Combustible Matter Content	Width(CM)	Wet-out Rate(s)	Moisture Content
		Longitudinal	Transverse
EMC100	100±22	≥30	≥30	1.8%-8.5%	1040/1270	≤40	≤0.20%
EMC200	200±22	≥40	≥40			≤60
EMC300	300±22	≥60	≥60			≤80
EMC375	375±20	≥60	≥60			≤80
EMC450	450±20	≥80	≥80			≤100
EMC600	600±18	≥80	≥80			≤100

 

3.Feature of Chopped Strand Mat:

• Consistent thickness and stiffness
• Rapid impregnating and good compatibility with resin
• Superior wet through with less air trap
• Good mechanical properties and high strength of parts
• Good cover mold, suitable for modeling complex shapes.

4.Usage Of Chopped Strand Mat:

 

The Usage of EMC 450g Fiberglass Chopped Strand Mat for epoxy resin

 

• Automobile accessories
• Plumbing fittings
• Chemical anticorrosive pipeline
• Cooling towerBasin
• Boats and ships
• Building
• Furniture

It’s mainly used in hand lay-up, filament winding and compression molding processes. The typical FRP products are panels, tanks, boats, complete set of sanitary equipment, automotive parts, cooling towers, pipes etc.

Uniform thickness, softness and hardness good.

 

 

 

5.Storge And Packaging

• Each roll is packed by polyester bag and then put into a cardboard box or plastic woven bag.
• The weight if each rill is between 20—85kg.
• The rolls are to be horizontally placed and could be in bulk or on pallet.
• Optimum storage conditions are between the temperature of 5—35℃ and with the humidity between 35%—65%.
• The Product should be used within 12 mongths from the time of delivery and remain in theiroriginal packaging until just prior to use.